Exhaust systems
Turbo-back and cat-back systems with V-band connections, including big 5-inch stainless for diesels.
Stainless, aluminized steel
Custom fabrication on Long Island, NY
Built by hand.Weldedto last.
Intercoolers, exhaust, intake piping, tanks and one-off parts. Stick, MIG and TIG welding plus brazing, all by Jason at Jbird Metalworks.
What we build
Performance cars, hot rods and diesel trucks. Bring a part, a sketch, or just the problem you're trying to solve.
Intake & charge piping
Charge pipes, intakes and custom plumbing for single and twin setups.
Aluminum, stainless
Intercoolers & end tanks
Custom aluminum end tanks, tapered tanks and bigger inlets, sized to fit your car.
Aluminum
Headers & manifolds
Custom headers, collectors and manifold modifications for hot rods, drag cars and swaps.
Mild steel, stainless
Fuel & fluid tanks
Fuel cells, coolant and catch tanks with welded bungs and fittings.
Aluminum
Custom body panels
One-off panels and bumpers shaped and welded from scratch, with cutouts for lights.
Sheet steel, plate steel, aluminum
Repair & one-offs
Cracked cast iron, brackets, railings and parts you can't buy anymore.
Cast iron, steel, aluminum, stainless
Featured build
C5 Corvette Hi-Ram intake
A custom intake made to feed a Holley Hi-Ram manifold, routed to clear everything under the hood.
- Car
- C5 Corvette
- Part
- Custom intake
- Built for
- Holley Hi-Ram intake manifold
Custom fabrication
Not every job is a car part. Jason also takes on one-off builds for homes and shops, made to fit exactly where they go.
One-off project
Custom stair railing
A custom railing made to fit a space where prefabricated, store-bought material wouldn't. Precisely fabricated on our fixture table, then installed on site.
- Project
- Stair railing
- Why custom
- Store-bought railing wouldn't fit
- Built on
- Fixture table, for precise fit
14 Google reviews
“Cleanest welds on the island.”
Very informative, doesn't break the bank, and all around great family man. Wouldn't go anywhere else.
Jay’s work is top notch. Communication was great. Welding and Fabrication work best around. Honest family man providing great service which is hard to find these days. Goes the extra mile to make sure customers are satisfied. 10/10
Jay treated me as I was a friend not just another client. Work was impeccable with lots of updates during the process. I was never left if any questions while what I needed was being made. Quality of work is also 100000/10. No questions asked about the quality always top notch.
Jbird Metal Works has done custom welding and fabrication for me on scooters, cars, and more. He can do it all. Consistently exceptional quality, clean & strong welds, great attention to detail. Takes great pride in his work which is hard to find these days. Highly recommend.
J Bird Metalworks delivers top-notch welding work. The craftsmanship is solid, the welds are clean, and the attention to detail really shows. Communication was straightforward, pricing was fair, and the job was completed on schedule. It’s clear they take pride in their work. I wouldn’t hesitate to use them again or recommend them to others.
Jason is a true professional. He had my Mustang exhaust welded up a timely manner. He is knowledgeable, professional and efficient. 10/10 would use his services again! Thanks Jay!
He did a great job on our railing. Paid attention to what we wanted, detail is top notch and was quick turn around time. Highly recommend.
Jay is the best. Very knowledgeable and very talented at what he does. I’ve dealt with a lot of shops over the years, and unfortunately customer service and care is non existent with most of them. Customer service, communication and overall experience with Jay is up there with the best. Can’t recommend him enough.
I can finally write a review!! Iv watched Jay grow and become an amazing fabricator over the years. His work is top notch quality. I wanted him to be apart of a project iv been working on for a while and had him tig weld my aluminum fuel tanks for my mark 2 ford gt40 replica. They came out beautiful! I wish he lived closer so I can have him help me out more often!
Highly highly recommend Jay. He is very knowledgeable and honest. Very well trusted
It was a pleasure working with him, He did a fantastic job on my scooter carrier adding a smooth plate to get it on the carrier. Did the work fast and got me back on the road fast.
Excellent custom work and welds! Highly recommend Jay for metal work.
Great work, pays attention to detail and fast turn around time
Best in the biz! Could not recommend enough!
The welder behind every build
Jason is a world-class welder who builds the kind of parts other shops turn down.
Every weld is laid by hand and meant to be looked at as much as driven: clean, consistent beads on stainless and aluminum that hold up under heat, boost and vibration.
- Stick welding
- MIG welding
- TIG welding
- Brazing
Talk to the fabricatorNo front desk. You work with Jason from first message to pickup.
Made to fit your carParts are built and test-fit to your build, not pulled from a catalog.
Local or shippedCars on Long Island by appointment. Small parts can ship in and back.
How a build works
No guessing on price or timeline. You'll know what you're getting before any metal gets cut.
01
Tell us the plan
Send photos, measurements or an idea. If it helps, set up a time to bring the car by.
02
Get a quote
You get a clear price, materials list and timeline before work starts.
03
We fabricate
Parts are built, test-fit and welded in-house, with progress photos along the way.
04
Pick up or ship
Pick it up on Long Island after a final fit check, or have small parts shipped to you.
From the shop
Real parts, real welds. Tap any photo to see it up close.
Questions
Don't see yours? Call or text (631) 434-5694.
Where are you located?
Jbird Metalworks is on Long Island, NY, and serves the whole island. Visits are by appointment.
Can you work on parts if I'm not on Long Island?
Yes. Small parts can be shipped in, fabricated or repaired, and shipped back to you.
Do I need to bring my car in for a quote?
Not always. Start with photos, measurements and what you want built. If the job needs a test fit, we'll set up a time.
What welding processes do you offer?
Stick, MIG and TIG welding, plus brazing. The right process depends on the metal and the job.
What materials do you weld?
Aluminum, stainless, mild steel and cast iron repair.
How does pricing work?
Every build is custom, so you get a quote with price, materials and timeline before any work starts.
Start your build
Tell us about the car and what you want made. Out of state? Small parts can be shipped.
- Call or text(631) 434-5694
- EmailJbirdmetalworks@gmail.com
- Service areaAll of Long Island, NY
- Instagram@jbird_metalworks
- FacebookJbird Metal Works